EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller can be a highly effective solar controller created for off-grid photo voltaic units. Depending on multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and system balance for a variety of photovoltaic (PV) applications.
Key Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller know-how for top-quality photo voltaic energy harvesting. Important attributes contain:
Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with serious-time details checking.
Various Load Command Modes including handbook and timer.
In depth Digital Protections versus overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Action Guide to Setting Up the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Ensure all parts are involved: Tracer AN device, temperature sensor, conversation cables, and consumer guide.
Confirm the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Demand Controller
Find a well-ventilated, dry location near the battery lender.
Secure the Tracer AN controller using the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Normally observe suitable security protocols and ensure the procedure is run off ahead of connecting elements.
Stage one: Hook up the battery terminals for the charge controller (positive to favourable, detrimental to damaging).
Stage two: Link the photo voltaic panel array towards the PV enter terminals.
Move three: Connect the load terminals if utilizing a direct load relationship.
Move four: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Energy over the controller by connecting the battery initially.
Use the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, mild control.
five. Checking and Details Logging
The Tracer AN Sequence supports genuine-time checking utilizing the MT50 remote meter.
Details might be logged via the RS485 More info communication port working with computer software such as Photo voltaic Station Laptop.
Distant checking is achievable with the EPEVER WiFi module.
6. Troubleshooting Prevalent Troubles
Situation 1: No Energy Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Situation two: More than-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Regulate technique parameters if necessary.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Lowered Electrical power losses in the course of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Extended Battery Daily life: Constant and precise charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is definitely an Fantastic choice for optimizing solar energy technology and lengthening battery lifetime. By following the above set up guide, consumers can ensure highest performance and system longevity.